1、首先需要检查焊接冷水机制冷量是否超过点焊机和焊接机器人发热量，若焊接冷水机与设备不匹配，焊接冷水机的制冷量少于焊接设备的发热量或者不足以使热量带走的时，焊接冷水机则很容易出现水温过高；

1. First of all, it is necessary to check whether the cooling capacity of the welding chiller exceeds the calorific value of the spot welding machine and welding robot. If the cooling capacity of the welding chiller is less than that of the welding equipment or not enough to take away the heat, the water temperature of the welding chiller is likely to be too high;

2、定时检查焊接冷水机，清理冷凝器灰尘以及更换循环冷却水，翅片冷凝器在使用环境中长时间有灰尘杂质，使冷水机内部的热量得到有效的驱散，故定期保样焊接冷水机是保证生产任务能顺利进行的重要一项；

2. Regularly check the welding chiller, clean the condenser dust and replace the circulating cooling water. There are dust and impurities in the fin condenser in the use environment for a long time, which can effectively dissipate the heat inside the chiller. Therefore, regular sample preservation and welding of the chiller is an important item to ensure the smooth progress of the production task;

3、检查焊接冷水机是否摆放在通风位置、出入风口是否有障碍物等 。

3. Check whether the welding water cooler is placed in the ventilation position and whether there are obstacles at the air inlet and outlet.

环谐定期回访客户，按期提醒用户对焊接冷水机维护保养，保证焊接产品的质量和速度，免费提供保养咨询，我们在设备上贴有售后二维码，以便给您及时服务。

Huanhe visits customers regularly, reminds users of the maintenance of welding water chiller on schedule, ensures the quality and speed of welding products, and provides maintenance consultation free of charge. We post-sale QR code on the equipment to provide timely service to you.